Frac Tank
- 500 BBL capacity
- Axle mounted flat top for easy transportation with a winch truck
- External or internal 8” manifold systems
- Easy access stairs and platforms
- Candy cane fill lines 3” and/or 6”
Mud Tanks
- 500 BBL capacity
- Axle mounted flat top for easy transportation with a winch truck
- Round bottom, 6" mixing line (gunline) with five mixing nozzles throughout the tank
- Dual 6" and 8" manifolds, with three 4" threaded connections on both
Acid Tanks
- Fiberglass lined for maximum protection against leaks
- 480 BBL capacity
- Axle mounted flat top for easy transportation with a winch truck
Air Drilling
Compressors
- Ingersoll Rand 1170 CFM with a rated discharge pressure of 350 PSI
- Doosan 1250 CFM with 350 PSI rated discharge pressure
- Environmentally friendly, self-contained skids with drains to capture any rogue liquids
- Caterpillar C-15 diesel engine raed for 525 bhp @ 1800 RPM
- A primary inline fuel filter system that is contained and set prior to all equipment
Boosters
- Gardner Denver WB12, 2-stage "Y" frame 6.5" x 5" with HD oilfield skid
- 1st stage - 5100 CFM flow with a rated discharge pressure of 600 PSI
- 2nd stage - 3270 CFM flow with a rated discharge pressure of 1400 PSI
- Gardner Denver WB12, 2-stage "Y" frame 7" x 5" with HD oilfield skid
- 1st stage - 4200 CFM flow with a rated discharge pressure of 600 PSI
- 2nd stage - 3800 CFM flow with a rated discharge pressure of 1400 PSI
- Double acting, water-cooled, pressure-lubricated direct-drive units
- Caterpillar C-18 diesel engine rated for 630 bhp @ 1800 RPM
- Environmentally friendly, self-contained skids with drains to capture any rogue liquids
- Environmental condensation collection tank designed to capture condensate from the booster for proper disposal
Soap Houses
- Mist pump houses with dual 30 BBL water tanks including electric load pumps to support the water tanks
- Shutoff/isolation valves included for water recirculation
- Dual FMC model L1122D mist pumps, electronically driven and controlled by variable frequency drives
- A redundant system is designed to operate simultaneously with a second pump for immediate back-up
- Mist pumps are rated at 40 GPM for a total of 80 GPM maximum and pressure relief valves
- Heated enclosures include circulation fans and ceiling l-beams easy pump removal and replacement
OBM Tank System
- 500 BBL capacity
- Axle mounted flat top for easy transportation with a winch truck
- Round bottom tank conjoined with a diesel or electric pump
- 6” mixing line(gunline) with five mixing nozzles throughout the tank
- Dual 6” and 8” manifolds, with three 4” threaded connections on both
- Allows our customers to roll mud on location between jobs, avoiding transport of the oil-based mud (OBM) back to the vendor for reconditioning
Environmental Spill Containment
- Constructed from UltraTech's heavy-duty, 40mil, textured polyethylene liner provides a rugged, impermeable barrier to capture leaks and spills.
- The liner is resistant to oil-based mud, diesel as well as various other chemicals including HCL acid, it can also be patched and repaired if a tear does occur
- The versatility of the liner allows it to be reused again and again which help to reduce our carbon footprint GPOR can custom build and modify the size on location. Sizes range from 4’ x 4’ to as long as 200’ Containment walls can be 4” or 6” drive-over foam or 24” modular jersey walls for high-capacity spill containment
- Disposable 30 mil polyethylene is available as well
Gas Busters
- 500 BBL capacity
- Double barrel, open top
- Axle mounted for easy transportation with a winch truck
Large-Bore Frac Iron
- This next generation monoline is a large bore, high-pressure missile that utilizes a modular design to create speed and efficiency regardless of your frac pad configuration
- The 7-1/16, 15k PSI frac iron is mounted on fully adjustable stands that can be moved with a telehandler
- High pressure hoses almost eliminate the need for 1502 frac iron
- The linear design allows for maximum power to the wellbore Integrated low pressure water manifold is mounted on top of the main line
- Fewer connections means improved safety and environmental impact
BOPs
- Sizes 7-1/16”, 11” and 13-5/8”
- Double and single
- Type U, UM, 70 and 81
- Pressure ranges 5M, 10M, and 15M
Drill Pipe & Tubing
- DP - Sizes 3-1/2” IF, 4" FH, 4" XT-39, 4" TSC-39
- Tubing - Sizes 2-3/8" EUE, 2-3/8 PH-6, 2-7/8 PH-6
- DP Grades S135
- DP Premium high-torque connections available
- DP Includes all associated handling tools
- Tubing 2-3/8 PH-6 and 2-7/8 PH-6 Grade P-110 are both hard banded
Handling Tools
Drill Pipe, 4” XT-39, 3 ½” IF, 4” FH, 4 ½” XH, IF, Various other sizes
- Subs – Crossover 3-1/2” to 6-5/8”, Bit 3-1/2” to 6-5/8”, Lift 3-1/2” to 4-1/2”, Pumpin 4-1/2” to 4”, Float 4”
- Slips – Rotary Type B and DU 4-1/2” & 5-1/2”, DC 4 ¼” to 5 ¾”, Type A, C
- Valves – Lower Kelly, 3 ½ to 5”, IBOP, 3 ½” to 5”
- Elevators – BN 3-1/2” to 5”, SGL JT 4” to 5”
- Stabbing Guides – 3-1/2” to 5”
- Top Drive Subs – Customer Specs
Tubing, 2 3/8” 8rd, 2 3/8” PH6, 2 7/8” PH6, Various other sizes
- Subs – Crossovers 2 3/8” to 3 ½”, Pump-in 2 3/8” to 3 ½”
- Slip Type Elevators – MYT, YT, HYT, 2 3/8” to 3 ½”
- Valves TIW – 2 3/8” to 3 ½”
- Hand Tongs – K20, K25
- Stabbing Guides – 2 3/8 to 3 ½”
- Clamps – Type T
Composite Mats
- Megadeck HD Composite Mats provides a strong, stable ground covering over the most uneven services
- Each mat is 6.5’ x 13’ (84.5 square feet)
- Overlapping flanges interlock to create one continuous surface that prevents separation under heavy rolling loads
- Made from non-toxic HDPE, which protects vegetation and environmentally sensitive areas
Glycol Heaters
- Wacker Neuson CH5000 Hydronic Surface Heaters
- Heat output 650k BTU
- Operating temperature 180 DEG F
- Hose length 4000’
- Heat efficiency 83%
Indirect Heaters
- Allmond Maxi-Heat 1000
- Insero Indirect Heater HT1010D
- Heat output dual 500k BTU